1Gbit/S Ethernet I/O Module; Overview - Fujitsu PRIMERGY PG-LND101 User Manual

1

1Gbit/s Ethernet I/O Module

This chapter explains the features and specifications of this product.
1.1

Overview

This product is an expansion LAN card exclusive to BX620 S2 Server Blade. This product has a
dual-port (2 ports) LAN controller, and provides LAN connection completely separate/ independent
of the onboard LAN. The external access is performed via the Switch Blade installed to the network
blade slot 3 or 4 (NET3 or NET4) on the chassis.
One product can be added to one BX620 S2 Server Blade. The following figure shows a
configuration example when ten BX620 S2 Server Blades (slot 1 to 10) are installed in the chassis. In
this example, 1Gbit/s Ethernet I/O Modules are installed in all server blades for convenience of
explaining LAN connection between each 1Gbit/s Ethernet I/O Module and network blade, however,
1Gbit/s Ethernet I/O Modules do not necessarily need to be installed on all server blades.
PRIMERGY BX600
Switch Blade(NET 1)
1 2 3 4 5 6 7 8 9 10
1
a b
A B
1 2 3 4 5 6 7 8 9 10
PRIMERGY BX600
Switch Blade(NET 3)
1Gbit/s Ethernet I/O Modules are connected to network blade slot3 or 4 (NET3 or 4)
48
11 12 13
2 3 4 5
c d a b c d a b
PRIMERGY BX620 S2 Server Blades
C D A B C D A B
11 12 13
11 12 13
PRIMERGY BX600
Switch Blade(NET 2)
1 2 3 4 5 6 7 8 9 10
6 7 8 9
a b a b a b a b
A B A B A B A B
1 2 3 4 5 6 7 8 9 10
PRIMERGY BX600
Switch Blade(NET 4)
11 12 13
10
a b
Onboard LAN
1Gbit/s Ethernet
I/O Module
A B