Event Log - Fujitsu PRIMERGY PG-LND101 User Manual

5.4

Event Log

When AFT, ALB, or SFT is used, the following event logs will be generated (source: i
ANSMiniport).
ID Type
6 Information
7 Information
8 Information
10 Information
11 Warning
12 Information
13 Warning
14 Information
15 Information
16 Warning
17 Information
18 Information
19 Information
20 Information
21 Information
22 Warning
35 Warning
38 Information
42 Warning
Notes
• Even when the teaming operation is started correctly, ID=6, 7, 8 event logs are stored at the system
boot. These can be ignored for it is not a problem.
• When teaming is configured, ID=11 warning log and multiple event logs such as ID=15 may be
stored in the event viewer system log at the system boot. These can be ignored for it is not a prob-
lem.
70
Primary adapter is initialized: (adapter name)
Adapter is initialized: (adapter name)
(team name): Team is initialized.
Current primary adapter is switched from the following adapter: (adapter
name)
The following adapter link is not connected: (adapter name)
Secondary adapter takes priority: (adapter name)
(adapter name) is disabled in the team.
Secondary adapter is added to the team again: (adapter name)
The following adapter link is connected: (adapter name)
(team name): The last adapter lost link. Network connection is lost.
(team name): Adapter reestablished link. Network connection is recovered.
The following preferred primary adapter is detected: (adapter name)
The following preferred secondary adapter is detected: (adapter name)
The following preferred primary adapter takes priority: (adapter name)
The following preferred secondary adapter takes priority: (adapter name)
Primary adapter could not detect the following probe: (adapter name) Cause:
A team may be divided.
(team name) missing one adapter is initialized. Check that all adapters exist.
(adapter name) is removed from the team.
(adapter name) is not set correctly.
Adapter cannot process remote management function and be in a network
team at the same time.
Message