Safety Instructions; Safety Instructions; Supervisor's Responsibilities; Before Operating - Toro Workman GTX Service Manual

Hide thumbs Also See for Workman GTX:
Table of Contents

Advertisement

Safety Instructions

The Workman GTX vehicles are designed and tested to
offer safe service when operated and maintained pro-
perly. Although hazard control and accident prevention
partially are dependent upon the design and configura-
tion of the machine, these factors are also dependent
upon the awareness, concern and proper training of the
personnel involved in the operation, transport, mainte-
nance and storage of the machine. Improper use or
maintenance of the machine can result in injury or
death.

Supervisor's Responsibilities

1. Make sure operators are thoroughly trained and fa-
miliar with the Operator's Manual and all labels on the
vehicle.

Before Operating

1. Read and understand the contents of the Operator's
Manual and Operator's DVD before starting and operat-
ing the vehicle. Become familiar with the controls and
know how to stop the vehicle and engine quickly. Addi-
tional copies of the Operator's Manual are available on
the internet at www.Toro.com.
2. Keep all shields, safety devices and decals in place.
If a shield, safety device or decal is defective, illegible or
damaged, repair or replace it before operating the ve-
hicle. Also, tighten any loose nuts, bolts or screws to en-
sure vehicle is in safe operating condition.
Safety
This safety symbol means DANGER, WARNING,
or CAUTION, PERSONAL SAFETY INSTRUC-
TION. When you see this symbol, carefully read
the instructions that follow. Failure to obey the
instructions may result in personal injury.
To reduce the potential for injury or death, com-
ply with the following safety instructions.
The Workman GTX is an off−highway vehicle
only. It is not designed, equipped or manufac-
tured for use on public streets, roads or high-
ways.
2. Be sure to establish your own special procedures
and work rules for unusual operating conditions (e.g.
slopes too steep for vehicle operation).
3. Since fuel used in Workman vehicles is highly flam-
mable, handle it carefully:
A. Store fuel in containers specifically designed for
this purpose.
B. Do not remove vehicle fuel tank cap while engine
is hot or running.
C. Do not smoke while handling fuel.
D. Fill fuel tank outdoors and only to within an inch of
the top of the tank, not the filler neck. Do not overfill
the fuel tank.
E. Clean up any spilled fuel.
Page 1 − 2
WARNING
WARNING
Workman GTX Gasoline

Advertisement

Table of Contents
loading

Table of Contents