Toro Workman GTX Service Manual page 147

Disassembly (Fig. 33)
1. Park vehicle on a level surface, stop engine, set
parking brake and remove key from the key switch.
2. Raise front hood to gain access to the steering com-
ponents.
3. Remove dash and position it toward the front of the
vehicle to allow access to the shift lever assembly (see
Dash in this section). It is not necessary to remove
choke cable from dash.
4. Disassemble shift lever as necessary using Figures
33 and 22 as guides.
Assembly (Fig. 33)
1. Assemble shift lever using Figures 33 and 34 as
guides.
2. Carefully position and secure dash to vehicle (see
Dash in this section).
3. Lower and secure front hood.
Workman GTX Gasoline
1
2
1. Shift lever
2. Detent arm
Page 6 - - 35
3
Figure 34
3. Extension spring
Chassis