Battery Control - Huawei SUN2000-2KTL-L1 User Manual

SUN2000-(2KTL-6KTL)-L1
User Manual
Parameter Name
----End

7.2.1.2 Battery Control

Function
If the SUN2000 connects to a battery, you need to set battery parameters.
Forcible Charge and Discharge
Step 1 On the home screen, choose Power adjustment > Battery control > Forced
charge/discharge and perform operations as required. Tap Submit.
Figure 7-11 Forced charge/discharge
Issue 04 (2021-04-01)
Communication
disconnection fail-safe
Communication
disconnection
detection time
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interaction
Description
In the SUN2000 anti-backfeeding
scenario, if this parameter is set to
Enable, the SUN2000 will derate
according to the active power
derating percentage when the
communication between the
SUN2000 and the Smart Dongle is
disconnected for a period longer than
Communication disconnection
detection time.
Specifies the time for determining the
communication disconnection
between the SUN2000 and the
Dongle.
This parameter is displayed when
Communication disconnection fail-
safe is set to Enable.
71