Bosch GLM400CL Operating/Safety Instructions Manual page 20

- Rated voltage
- Capacity
- Number of battery cells
- Charging time
- Output voltage
- Charging current
- Protection class
Degree of Protection
Bluetooth
Operating frequency band
Max. transmission power
- Charging voltage
- Charging current
A) For measurements from the rear edge of the measuring tool, applies to high
C) After user calibration at 0° and 90°, an additional grade error of +/-0.01°/degree to
D) At 25°C operating temperature.
E) In the continuous measurement function, the maximum operating temperature
F) When using Bluetooth
G) Automatic switch-off of the measuring tool is adjustable after 2, 5, 10 minutes
H) The left-hand side of the measuring tool serves as the reference level for grade
A long battery runtime is achieved by means of energy-saving measures, such
as deactivating the Bluetooth
brightness, etc.
The measuring tool can be clearly identified with the serial number 15 on the type
plate.
20
1.800.561.8187
®
reflectivity of the target (e.g. a white-painted wall), weak backlighting and 25°C
operating temperature. In addition, a deviation of ±0,05mm/m must be taken
into account.
reflectivity of the target (e.g. a white-painted wall), and strong backlighting. In
addition, a deviation of ±0.15 mm/m must be taken into account.
45° (max.) has to be taken into account.
is +40°C.
®
Low Energy tools, it may not be possible to establish a
connection depending on the model and operating system. Bluetooth
support the GATT profile.
or never.
measurement.
www.
IP54
(dust and splash water protected)
®
Bluetooth smart (4.1 low-energy)
®
function when not required, or reducing the display
.com
3.6 V
3120 mAh
1
D)
approx. 5.5 h
5.0 V
1000 mA
/ II
D)
F)
2402 – 2480 MHz
8 mW
5.0 V
1000 mA
®
tools must
information@itm.com