Operation - Bosch GLM400CL Operating/Safety Instructions Manual

time can be noticeably longer.
The measuring tool cannot be used on its own during the
charging process.
The Bluetooth
procedure. Existing connections to other devices are
interrupted. This can lead to data loss.
Notes for Optimum Handling of the Battery in the
Measuring Tool
Store the measuring tool only within the allowable temperature
range, see "Technical Data" . As an example, do not leave the
measuring tool in a vehicle in summer.
A significantly reduced operating time after charging indicates
that the battery has deteriorated and must be replaced by
Observe the notes for disposal.
Do not subject the tool to extreme temperatures or
variations in temperature. As an example, do not leave
it in vehicles for longer periods. In case of large variations
in temperature, allow the tool to adjust to the ambient
temperature before putting it into operation. In case of extreme
temperatures or variations in temperature, the accuracy of the
tool can be impaired.
Avoid heavy impact or falling of the tool. After heavy exterior
impact on the tool, an accuracy check should always be
carried out before continuing to work (see "Accuracy Check of
the Distance Measurement", page 38).
the eyes of others. Serious eye injury could result.
22
1.800.561.8187
®
function switches off during the charging

Operation

Protect the tool against moisture and
direct sun irradiation.
DO NOT stare directly at the laser beam
or project the laser beam directly into
www. .com
information@itm.com