Bosch GLM400CL Operating/Safety Instructions Manual page 36

®
Bluetooth Interface
Do not turn on laser remotely using the
Bosch app without line of sight to the
laser tool. The sudden bright laser beam may increase the risk
of personal injury or property damage.
Ensure there are no bystanders in the direct path of the laser
beam before turning on the laser remotely.
Data Transmission to other Devices
®
The measuring tool is equipped with a Bluetooth module,
which enables data transmission via radio technology to
®
certain mobile terminals/devices with a Bluetooth interface
(e.g., smartphones, tablets).
For information on the necessary system requirements for a
.
®
Bluetooth
Further information can be found on the Bosch product
page.
®
For data transmission via Bluetooth , time delays between
mobile terminal/device and measuring tool may occur. This
can be possible due to the distance between both devices or
the object being measured.
®
Activating the Bluetooth Interface for Data Transmission
to a Mobile Terminal/Device
®
The Bluetooth interface is activated in the basic settings. To
®
activate the Bluetooth signal, press button 4 [+]. Ensure that
®
the Bluetooth interface is activated on your mobile end device.
extend the range of functions of the mobile end device and to
make data easier to process. You can download this from the
store for your end device type.
The connection between mobile terminal/device and
started. If multiple active measuring tools are found, select the
appropriate measuring tool using the serial number.
The connection status, as well as the active connection (f), are
shown in the display 1 of the measuring tool.
36
1.800.561.8187 information@itm.com
www. .com