Table of Contents
Advertisement
4-3. Error Logger Display Mode (M2)
4-3-2. Display Mode
SET button
A white square mark is displayed in the upper-right
position of the superimpose picture when the SET button is
pressed. The unit then enters the normal operation state (in
which the normal operation of this unit except a menu
system can be performed).
However, the character information (time code or opera-
tion status) superimposed during normal operation is not
displayed in this case.
To return to the former state, press the MENU button.
MENU button
The display returns to the error logger display mode when
the MENU button is pressed with the white square dis-
played in the upper-right position of the superimpose
picture.
Pressing the MENU button in the error logger display
mode terminates the error logger display mode.
Limited-display screen
For the error log of a category that is set to OFF in the
menu of setting mode (refer to Section 4-3-3), information
items other than a log number are not displayed. However,
the whole display using the F FWD button is not influ-
enced by the setting.
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'96 07 03
09:23:15
Ordinary Screen
(No limited-display)
4-58
ERROR LOGGER
(001/003)
*
001
002
003
'96 07 03
09:23:10
Only Tape-Error Turned Off
Example of display and operation
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'96 07 03
09:23:10
0 [SET]
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'96 07 03
09:23:10
0 [MENU]
ERROR LOGGER
(001/003)
*
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
'96 07 03
09:23:15
DNW-A22/A22P
Advertisement
Table of Contents
