When "Data Register (D)" Is Selected - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition

16.5.6 When "Data register (D)" is selected

Monitoring and testing can be performed for the data register (D).
1. Description of display
[1] Displayed device
[2] Displayed device No.
[3]
Hexadecimal
[4]
Current value
[5] 32-bit
*1. Displayed when hexadecimal is specified.
*2. In the case of 16-bit data register (D), current
value is displayed in upper row.
In the case of 32-bit data register (D), upper 5 digits are displayed in upper row and the lower 5 digits
are displayed in lower row.
2. Monitor mode operation
Press the [+] or [-] buttons to change the device to monitor.
Return to the selecting a device screen, press [ESC] button.
Example when data register (D) 16-bit is monitored
Press the [+] button to increase the device number by "1". Press the [-] button to decrease the device number
by "1".
Press and hold the [+] or [-] button for 1 second or more to increase or decrease the value at high speed.
In the case of the list shown below, the screen display is as follows.
Device
D0
D1
D2
164
Display Content
*1
*2
Current value
50
100
150
[+]
[-]
16 Display Module (FX3S-5DM)
[1] [2] [3] [4] [5]
[+]
[-]
16.5 Monitor/Test