FX
Series Programmable Controllers
3S
User's Manual - Hardware Edition
4.4.2
Transistor output specifications
Item
Number of output points
Output connecting type
Output form
External power supply
Resistance load
Max. load
Inductive load
Open circuit leakage current
ON voltage
OFF→ON
Response time
ON→OFF
Output circuit insulation
Output operation display
Output circuit configuration
4 Specifications, External Dimensions and Terminal Layout (Main Units)
Transistor output specification
FX
-10MT
FX
3S
3S
4 points
6 points
Fixed terminal block (M3 screw)
Transistor/sink output (FX
Transistor/source output (FX
The total load current of resistance loads per common terminal should be the following value.
•
1 output point/common terminal: 0.5 A or less
•
4 output points/common terminal: 0.8 A or less
The total of inductive loads per common terminal should be the following value.
•
1 output point/common terminal: 12 W or less/24 V DC
•
4 output points/common terminal: 19.2 W or less/24 V DC
Y000, Y001: 5 μs or less/10 mA or more (5-24 V DC)
Y002 to Y015: 0.2 ms or less/200 mA or more (at 24 V DC)
LED on panel lights when photocoupler is driven.
Sink output wiring
Load
Y
DC power
supply
COM
Fuse
A common number applies to the
[COM ].
-14MT
FX
-20MT
3S
8 points
-MT/S, FX
-30MT/ES-2AD)
3S
3S
-MT/SS, FX
-30MT/ESS-2AD)
3S
3S
5-30 V DC
0.5 A/point
→ For details on the common terminal for each model,
12 W/24 V DC
→ For details on the common terminal for each model,
0.1 mA or less/30 V DC
1.5 V or less
Photocoupler insulation
Source output wiring
Load
Y
DC power
supply
+V
Fuse
of
A common number applies to the
[+V ].
4.4 Output Specifications
FX
-30MT
3S
14 points
refer to the Section 4.7.
refer to the Section 4.7.
of
33
1
2
3
4
5
6
7
8
9
10