Die-cut Label (Gaps) and Roll Paper
When Borderless Printing Enabled
Margins at top, bottom, right, and left (inside label): 0 mm (typical value)
Paper width
center
Perforation position
Auto cut position
Auto cut position
Waste part
2.0 mm
Q
The maximum value of the print area width is 104 mm.
Note
Backing paper width
Print area width
Paper feed
direction
*1: When not auto cutting,
8.0 mm or more
*2: When not auto cutting,
11.0 mm or more
Waste part
Print area
Label
2.0 mm
Backing paper
68