DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
CHAPTER 4.
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the extender via Wi-Fi connection, please make sure that you
are connected to the wireless network of DAP-1620 (see the WLAN name (SSID) on the back
panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 27. Restoring the default settings in the Wizard.
Figure 28. Checking connection to the wireless network.
Figure 29. Starting the Wizard.
Page 37 of 125
Configuring via Web-based Interface
VIA
WEB-BASED