Specifications - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

Specifications

Hardware
Processor
RAM
Flash
Interfaces
LEDs
Buttons
Antenna
MIMO
Power connector
Software
Network functions
Firewall functions
Management and monitoring
* The device features are subject to change without notice. For the latest versions of the firmware and relevant
documentation, visit www.dlink.ru.
*
·
MT7621AT (880MHz, dual core)
·
128MB, DDR3 SDRAM
·
16 MB, SPI
·
10/100/1000BASE-T LAN port
·
POWER/WPS
·
Wi-Fi Signal Strength
·
WPS button to set up wireless connection
·
RESET button to restore factory default settings
·
Two external non-detachable antennas (1dBi gain for 2.4GHz and 2dBi gain for
5GHz)
·
2 x 2, MU-MIMO
·
CEE 7/16 plug for AC power supply
·
DHCP server
·
Advanced configuration of built-in DHCP server
·
Stateful/Stateless mode for IPv6 address assignment
·
Automatic obtainment of LAN IP address
·
DNS relay
·
Autonegotiation of speed, duplex mode, and flow control / Manual speed and
duplex mode setup for Ethernet port
·
MAC filter
·
Access to settings through SSH/TELNET/WEB (HTTP/HTTPS)
·
Multilingual web-based interface for configuration and management
·
Firmware update via web-based interface
·
Automatic notification on new firmware version
·
Saving/restoring configuration to/from file
·
Support of logging to remote host
·
Automatic synchronization of system time with NTP server and manual
time/date setup
·
Ping utility
·
Traceroute utility
·
Schedules for MAC filters rules, automatic reboot, and enabling/disabling
wireless network
Page 6 of 125
Overview