D-Link DAP-1620 User Manual page 63

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed
parameters and click the APPLY button.
Also you can create an additional wireless network. To do this, click the ADD WI-FI NETWORK
button. On the opened page, specify the relevant parameters.
Parameter
Network name (SSID)
Hide SSID
BSSID
Figure 54. Creating a wireless network.
Wi-Fi Network
A name for the wireless network. The name can consist of digits and
Latin characters.
If the switch is moved to the right, other users cannot see your Wi-Fi
network. It is recommended not to hide the network in order to
simplify initial configuration of the wireless network.
The unique identifier for this wireless network. You cannot change
the value of this parameter, it is determined in the device's internal
settings. The field is displayed in the settings of the existing wireless
network.
Page 63 of 125
Configuring via Web-based Interface
Description