D-Link DAP-1620 User Manual page 59

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 51. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Address range
Lease time
The default route for
LAN clients
When all needed settings are configured, click the APPLY button.
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
Disable: Clients' IPv6 addresses are assigned manually.
•
Stateful: The built-in DHCPv6 server of the extender
•
allocates addresses from the range specified in the Address
range fields. Also when this value is selected, the Static IP
Addresses section is displayed on the tab.
Stateless: Clients themselves configure IPv6 addresses
•
using the prefix.
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
The lifetime of IPv6 addresses provided to clients.
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the extender as
the default IPv6 route.
Page 59 of 125
Configuring via Web-based Interface
Description