D-Link DAP-1620 User Manual page 60

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The extender
assigns IPv6 addresses in accordance with the specified pairs only when the Stateful value is
selected from the Mode of dynamic IPv6 address assignment drop-down list in the
Dynamic IPv6 Addresses section.
Figure 52. Configuring the local interface. The IPv6 tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the ADD button (
address field. You can choose a device connected to the extender's LAN at the moment. To do
this, select the relevant MAC address from the drop-down list (the field will be filled in
automatically). Then in the IP address field, enter an IPv6 address which will be assigned to the
device with the specified MAC address. In the Hostname field, specify a network name of the
device for easier identification (optional). Click the APPLY button.
To create MAC-IPv6 pairs for the devices connected to the extender at the moment, click the
KNOWN CLIENTS button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for an existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
the editing window.
). Then click the APPLY button. Also you can remove a pair in
Page 60 of 125
Configuring via Web-based Interface
). In the opened window, fill in the MAC