Interface Cable Connection; Serial Interface Cable - Epson UB-U09 Developer's Manual

Confidential

Interface Cable Connection

Serial Interface Cable

1. Confirm that the printer and host computer are turned off.
2. Connect the cable to the serial interface connector on the UB-U09.
Note:
Connect cables that have a smaller shell than the size indicated in the Figure 2-3. If the shell size is
bigger, it may not be connected.
3. Tighten the screws on both sides of the plug.
Note:
If the interface cable includes a separate ground line, the ground line should be connected to the
printer at either of the two UB-U09 mounting screws.
4. Connect the other end of the cable to the host computer.
5. Change the printer settings to the serial interface settings. For details, see the settings
described in the printer documentation.
Rev. B
Figure 2-3
UB-U09 Developer's Guide
Installation 2-5