Toro ProPass 200 Installation Instructions Manual page 11

WARNING
Battery terminals or metal tools could
short against metal tractor components
causing sparks. Sparks can cause the
battery gasses to explode, resulting in
personal injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the tractor.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the tractor.
Operating Tips
•
Connect the clevis hitch of the ProPass to the tow
vehicle. Use a high-strength hitch pin approved for
tow vehicles.
•
Turn on the fuel valve, place the throttle lever
at half throttle, engage the choke, and start the
engine. Once the engine starts, turn off the choke
and increase the throttle to maximum.
•
Test the ProPass operation. Ensure that there
are no hydraulic leaks and make any additional
adjustments.
•
After testing the hydraulic system, check the
hydraulic fluid and add more if required.
Note:
Ensure that the pendant and any cords do
not drag on the ground during operation.
11