Toro ProPass 200 Installation Instructions Manual page 8

1. Hose routing
43. Tighten all of the hydraulic connections and
fasteners.
44. Refit the ProPass Twin Spinner assembly.
45. Connect the black cable and the black pre-routed
cable to the battery negative terminal and the
white cable and the red pre-routed cable to the
battery positive terminal.
46. Plug the intermediate wiring harness into the
power harness connector on the ProPass
(Figure 18 or Figure
1. Power harness
Figure 17
19).
Figure 18
2. Intermediate wiring
harness
g013866
1. Power harness
g013946
8
Figure 19
2. Intermediate wiring
harness
g013948