Advertisement
FusionModule1000A20 Prefabricated All-in-One Data
Center
Initial Configuration Parameter Manual (2019,
Nicaragua)
1
Initial Configuration Parameter Manual
This chapter describes the notes for using the initial configuration parameter manual.
This document only describes initial configuration parameters involved in the
commissioning, operation, and maintenance (O&M) of a data center.
The system configuration parameters are essential to reliable running of the system.
Improper modifications of parameters may easily cause abnormal running status, or even
damage to the system. You are not allowed to modify configuration parameters without
permission when using a data center. If a modification is necessary, contact Huawei
technical support. Huawei shall not be responsible for any loss caused by unauthorized
configuration modification.
You can modify initial configurations under the guidance of Huawei engineers. Huawei
assumes no liability for any loss caused by unauthorized changes to the initial
configurations.
Some parameters mentioned in this document should be provided and configured by
onsite technical support engineers based on the actual application of the data center.
If parameters need to be modified during the running of systems, the operator should be
a professional in this field and familiar with each system and its working principles.
Before performing an operation, ensure that the prerequisites are met. Otherwise, the
expected result may not be achieved. More seriously, equipment damage and personal
injury may occur.
Before using this document, read through and keep in mind the safety precautions in this
document, the precautions in each chapter or section, and the cautions and notes for
operations.
Precautions provided in this document are only supplementary to the local laws and
regulations governing the data center.
Issue 01 (2019-05-06)
Copyright © Huawei Technologies Co., Ltd.
1 Initial Configuration Parameter Manual Usage
Usage
1
Advertisement
