B 、 Machine Lubrication P - Sharp VH-25 Series Operator's Manual

B、 Machine Lubrication :
a. Horizontal spindle, spindle bearing, and horizontal milling cutter arbor sleeve :
( 20VHS, 20VHA )
Lubrication of horizontal spindle drive gear and gear housing is of dipping and aplashing.
The horizontal spindle bearing lubrication adopts the forced automatic one.
The milling cutter arbor sleeve is lubricated by oil dripping.
Table gib surface and feed leadscrew are lubricated by the central forced type.
Position Lubricated Parts
Horizontal Spindle,
( A ) Inlet
Drive Gear & Taper
( B ) Outlet
Roller Bearings
( D ) Inlet Milling cutter
Arbor sleeve
Fig.30
KUO KUANG R-68
ESSO FBIS K53
DTE 26
GULF WAY
HARMONY
KUO KUANG R-68
Horizontal
GULF WAY
GREASE NO.2
SHELL TONNA 33
ESSO FBIS K-53
OPERATOR'S MANUAL
Lubricant Frequency
First oil change at
3 months after
installation. Than,
every other 6
months
Check oil lever
through ( E )
ewwkly
Q'ty
Filled up to
between H-L
in oil window
(C)
P 28 / 57