Sharp VH-25 Series Operator's Manual page 42

OPERATOR'S MANUAL
4. Saddle gib is attached to the position between the right side of saddle and the bese dovetail.
a. Loosen the saddle lock lever .
b. Move the saddle to the front part of the knee.
c. Take off the front and rear wiper holders ( F ) of saddles.
d. Clean the slideway and add the lubricant.
e. Use a screw driver to adjust the gib bolts ( E ) in the right front and rear parts of the saddle.
f. Employ the same methods to adjust the work table gib.
g. Lock up the wiper holders ( F ) on the saddle.
Fig.47
P 39 / 57