Sharp VH-25 Series Operator's Manual page 39

10. Replacement of v-belt of horizontal spindle:
a. Disconnect the power source.
b. Take off the two rear cover of machine body.
c. Loosen the four hexagonal bolts ( A ) on the motor mount.
d. Take out V-belt ( B ).
e. Assemble the components in the reverse order once the V-belt is replaced.
Note:
1. Upon installation of V-belts, each one of them shall keep an even and proper tension.
2. Replacements of V-belt shell conform to our company specifications.
OPERATOR'S MANUAL
Fig.43
P 36 / 57