ABB 2769522-C Installation And Maintenance Manual page 17

4. Remove the plug (11).
5.
Put the signal cable through the cable gland (9).
6. Install the cable gland (9) to the terminal
cover (5).
Installation and maintenance guide
1ZSC000563-ACD EN, REV. A, 2019-06-25
CAUTION!
Make sure that the seal (8) has a
correct seal against the signal cable.
An incorrect seal will cause water to
leak into the terminal cover.
NOTE!
If the bushing is used outdoors: the
cable gland must be of
IP67 classification or better, and have a
rubber seal (8).
NOTE!
The cable gland must have
PR 16 threads.
17