Panasonic AU-EVA1 Manual page 18

Focus (Creep)
Focus (Step)
Focus (Fine)
Focus (Binary)
SKAARHOJ DEVICE CORES
Initiates a Creep Focus far/nearer with speeds between -6 to +6
Binary triggers: Will only reflect the speed of the Creep Focus value (-6
to +6)
Pulse inputs: Will cycle between -6 to +6. When -6 Creep Focus near is
at the highest speed. When +6 Creep Focus far is at the highest speed.
When 0 no zoom is initiated.
Displays: "Creep Fcs/Speed of focus"
Focus far/near with steps defined to a specific value. Used to quickly
focus to a desired range
Binary triggers: Will only reflect the current focus value in m
Pulse inputs: Will focus far/near with the given speed value
Speed Limit 1: Small steps
Speed Limit 6: Large steps
Displays: "Step Fcs/Focus range in m"
Focus far/near with small steps to a specific value focus range
Binary triggers: Will only reflect the current focus value in m
Pulse inputs: Will focus far/near in small steps to set a specific focus
value. Only recommended to use for very small adjustments. Reacts
slow if turned multiple times
Displays: "Fine Fcs/Focus range in m"
Used to Focus far/near via buttons instead of a encoder
Binary triggers: Focus far/near as long as a button is pressed and held
down. Speed of the focus is determined with the speed limiter.
Pulse inputs: Not implemented
Displays: "Focus/[Near,Far]"
18