CLSC3000
10
Scanner Installation
10.1
Installation Sequence
10.2
Hardware Installation
Installation Manual, CLSC004enI3c
© Siemens AG 2010 / Date of issue: 2010-05-19
Installation sequence for scanner components:
Hardware installation (mechanical / electrical)
Colour Letter Scanner
−
IDH computer
−
Software Installation
Preparatory work
Activate Maintenance Level 6.
Installation step 1: Installing the CLSC
The scanner is installed in the mail transport section of the machine at the
location specified by the machine supplier.
Refer to the documentation "Colour Letter Scanner CLSC3000, Adjustments
and Repair", section "Replacing the Colour Letter Scanner" for additional
information on scanner installation.
Position the scanner at its predefined installation position in the
machine and use the threaded M6 bolts to fix it.
Note!
If the scanner is being fixed with one bolt instead of two bolts on
either side of the scanner, then use larger washers with outer diameter
of 18 mm to maintain mounting stability.
Scanner Installation
Installation Sequence
10-1