Towing Pin - Hitachi ZW 180-6 Operator's Manual

Towing Pin

d
WARNING: Since towing is a potentially dangerous
operation, perform only when there is an
emergency or crisis situation.
IMPORTANT: To prevent excessive wear of tires and
for safety, avoid towing requiring more than the
available towing force, and keep the specified
speed during towing.
Available towing force: 120.0 kN (26980 lbf)
Towing speed: 10 km/h (6.2 mph) or less
Towing pin (4) is located on the back end of the machine.
It is used for towing another machine, being towed from
the rear side, or fastening the machine on a trailer deck for
transportation.
Tie or loop the towing rope, strap, or cable and let it pass
through the hole. Secure it with the β-shaped lock pin (5).
OPERATOR'S STATION
1-134
4 5
4
MNEK-01-007
MNEK-01-008