Replace Pilot Circuit Accumulator; Check Ride Control Accumulator Function, Gas Leakage, Looseness, And Damage (Option); Check Gas Pressure In Ride Control Accumulator (Option); Check Gas Pressure In Steering Accumulator - Hitachi ZW 180-6 Operator's Manual

Replace Pilot Circuit Accumulator

--- every 4000 hours or once every two years
whichever comes first.
Consult your authorized dealer for replace.
Check Ride Control Accumulator Function, Gas
Leakage, Looseness, and Damage (Option)
--- every 500 hours
d
WARNING:
 Allow only qualified personnel to handle the
accumulator.
 High-pressure nitrogen gas is enclosed in the
accumulator. (N is inert.) Caution is required to
2
prevent fires from occurring.
 Never strike the accumulator. Keep the accumulator
away from heat sources.
 Do not directly heat the accumulator. Do not weld
the accumulator housing.
 Be sure to release pressure before starting to work
on the pipe lines.
Let the machine travel with the ride control switch turned
AUTO and OFF to compare the machine's vertical vibration
during travel. Travel the machine at a speed faster than "Ride
Control Drive Speed Setting" displayed on the multi-monitor. If
the machine's vertical vibration is not dampened when letting
the machine travel with the ride control function activated, the
accumulator may be faulty. Consult your authorized dealer for
check and repair.
Check Gas Pressure in Ride Control Accumulator
(Option)
--- every 2000 hours
Check the gas pressure at a regular interval. Ask your
authorized dealer for checking.

Check Gas Pressure in Steering Accumulator

--- every 2000 hours
Check the gas pressure at a regular interval. Ask your nearest
authorized dealer for checking.
While steering the machine, if you feel pulsation or vibration
and machine does not turn smoothly, contact your nearest
authorized dealer for the gas pressure checking.
MAINTENANCE
7-59
MNEC-07-069
MNDB-07-020
MNEC-07-114