Check Work Lights; Check Horn And Backup Alarm - Hitachi ZW 180-6 Operator's Manual

Wheel loader
Hide thumbs Also See for ZW 180-6:
Table of Contents

Advertisement

Check Work Lights

--- every 10 hours (daily)
d
CAUTION: If any burned-out light is found,
immediately replace it with a new one.
Visually check all work lights that they normally light and/or
flash from the front and rear sides of the machine.

Check Horn and Backup Alarm

--- every 10 hours (daily)
d
WARNING: Before checking the horn and/or the
backup alarm, always apply the parking brake and
clear the machine's vicinity of other personnel.
Horn (1) is located on the front chassis.
The horn switch button is located at the steering wheel center
and on the right console. If the machine is equipped with a
multi-function joystick lever, the horn switch is located on the
multi-function joystick lever. Backup alarm (2) is located at the
left side of the rear grille. Check that backup alarm (2) correctly
sounds by operating either the forward/reverse lever or the
forward/reverse switch to the reverse drive side.
MAINTENANCE
2
7-87
MNEK-07-039
1
MNEK-07-039
MNEK-07-040

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents