Huawei FusionModule1000A40 Initial Configuration Parameter Manual page 98

Remarks:
The AC actuator connects to the ECC800 controller in wireless mode.
Remarks:
After a camera is commissioned, label the camera with its name and IP address.
Remarks:
Camera commissioning: Obtain the IP address automatically allocated by the ECC800 to the camera through Huawei IPC TOOL. Then access the camera on the WebUI over
Remarks:
the IP address to configure the internal IP address.
Optional Functions of the NetEco
No.
1 Fire alarm linkage air conditioner
2 Client authorization
3 Work order management
4 Energy efficiency management
5 Northbound SNMP interface for alarms
6 Northbound SNMP interface for performance data
7 Capacity management
8 Mobile APP O&M
Address SW1
0 ON
1 OFF
2 ON
DIP Switch Settings for the AI/DI Module
SW2
ON
ON
OFF
Function
SW3
ON
ON
ON
Yes/No
No
No
No
No
No
No
No
No