Asus GigaX 2008EX User Manual page 20

GigaX2008EX L2 Managed Switch User Manual
This is the factory default IP address of the switch.
A login screen appears, as shown in Figure 6.
Enter your user name and password, and then click OK to enter the
Configuration Manager. Use the following defaults the first time you log into this
interface:
Default User Name:
Default Password:
3. To setup a new IP address, click System, then IP Setup (see Figure 7). Fill
in the IP address, network mask and default gateway, then click OK.
4. If your new address is different from the default, the browser cannot update
the switch status window or retrieve any page. This is normal. You have to
retype the new IP address in the address/location box, and press <Enter>.
The WEB link returns.
5. To enable authentication for Web access, click Administration on the menu
list, then select Enabled to start the protection.
A login window appears immediately after you click OK.
10
http://192.168.1.1
Figure 6. Login screen
admin
(no password)
You can change the password at any time (see section 5.3.1
System Commands).
Figure 7. IP setup