System Commands - Asus GigaX 2008EX User Manual

5.3.1 System Commands

[System Name]
Displays the given name of the switch. This is an RFC-1213 defined MIB object
in System Group, and provides administrative information on the managed node.
CLI command: sys info name <system name description>
If you put a name in the name description field, the switch system name will be
changed into the new one.
[System Contact]
Displays the detail information of contact about the switch. This is an RFC-1213
defined MIB object in System Group, and provides contact information on the
managed node.
CLI command: sys info contact <system contact description>
If you put the contact description in the contact description field, the switch
contact information will be changed to the new one.
[System Location]
Displays the physical location of the switch. This is an RFC-1213 defined MIB
object in System Group, and provides the location information on the managed
node.
CLI command : sys info location <system location description>
Type the location description in the location description field to change the location.
[VLAN ID]
Display the VLAN ID for the switch. It is necessary to be within the same VLAN
for management .
GigaX2008EX L2 Managed Switch User Manual
Figure 40. System commands
37