Traffic Control; Dynamic Addresses - Asus GigaX 2008EX User Manual

GigaX2008EX L2 Managed Switch User Manual
4.5.3 Traffic Control
Traffic control prevents the switch bandwidth from flooding packets including
broadcast packets, multicast packets. The limit number is a threshold to limit the
total number of the selected type packets. For example, if broadcast/ multicast
is enabled, the traffic amount of each type will not exceed the limit value. Click
OK to save the new configuration. To make the configuration effective, go to
Save Configuration page, then click Save .
Figure 20. Traffic control

4.5.4 Dynamic Addresses

This page displays the result of dynamic MAC address lookup by port, VLAN ID,
or specified MAC address. The dynamic address is the MAC address learned by
switch, it will age out from the address table if the address is not learned again
during the age time. User can set the age time by entering a valid number from
15 to 3825 in seconds. Then click on OK to save the new age value. To make the
configuration effective, please go to Save Configuration page, then click on Save.
You can look up MAC addresses by checking the port, VLAN ID, or/and MAC
address, then click on Query. The address window will display the result of the query.
Figure 21. Dynamic address
20