Mitsubishi Electric G-50A Instruction Book page 15

(1) Local remote control operation prohibition setting
• G-50A can prohibit the operation of item such as connected local remote controller or sub system controller for
each group. The prohibit items are ON/OFF operation, operation mode, temperature setting and filter sign reset
operation.
1 The operation setting screen is displayed.
REMOTE
PROHIBITION
2 Press the
0
NOTE:
• The system controller that performed the local remote control operation prohibition setting can operate
the prohibited items.
• When the No.4 function select is set ON, the prohibit setting of the local remote control operating
cannot be made. For details, refer to "5-3 Function setting".
• In a LOSSNAY group, the operations of only the "ON/OFF" and "FILTER RESET" functions can be
prohibited.
• When an M-NET remote controller is used, it must be properly registered to the group for the G-50A unit
to be able to prohibit its operation.
1 Press the
2 Press the
1 The prohibit setting screen is displayed.
2 Press the operation switch for the items to be prohibited.
1 The items selected for prohibition are shown in reverse display.
2 After setting of prohibit item, press the
switch to set "PROHIBIT [ON]".
switch to display the group that the operation pro-
GROUP
SELECT
hibition setting will be performed.
or switch to set "PROH. (PROHIBIT)" on the blink-
ENTER
ing display and press
• When the ON/OFF operation is to be prohibited
• When the operation mode is to be prohibited
• When the setting temperature is to be prohibited
• When the filter sign reset is to be prohibited
operation setting screen.
Remote operation prohibition/permission display will
be change [PERMIT] to [PROHIBIT] and the prohibited
item set on the prohibit setting screen are shown in
reverse display.
The prohibit setting is completed.
– 14 –
switch.
BACK
switch to go back to the
SCREEN
ON/OFF
:
1
MODE
:
2
: or
4 7
RESET
:
DEL.