Mitsubishi Electric G-50A Instruction Book page 33

NEXT
<Group name correction>
Group name cursor
Group name cursor movement mark
9When the group name setting is completed, press the
The group configuration setting screen is displayed.
0Repeat operation 3 to 9 and perform the group name setting for each
group.
AWhen all the group name settings are complete, press the
BThe initial setting menu screen is displayed.
To perform the setting, refer to section "5-7 User setting (page 34)".
Simultaneously press the
screen for 2 seconds to complete user operation.
Next refer to section "4 User operation" and perform user operation.
When performing corrections to the group name, move the group name
cursor to the character to be correct.
Group name cursor movement method
Move the cursor to one of the group name cursor movement mark using
the
• Deletion methods
Move the group name cursor to the character to deleted and press the
switch to delete the character.
DEL.
• Insertion methods
Move the group name cursor to the location where character is to be
insert and press the
– 32 –
and keys on the initial setting menu
switch.
switch to enter desired space.
9 INS.
BACK
switch.
SCREEN
BACK
switch.
SCREEN