Mitsubishi Electric G-50A Instruction Book page 34

(2) Group name copy
• A certain group name can be copied to another group.
(This method use the "M" (memory) and "MR" (memory read) functions.)
• It is convenient to use a group name for other groups because a group name that was copied can also be corrected.
GROUP
1Press the
SELECT
name setting screen.
2Press the
3Press the ENTER
switch one time to record the setting name in memory.
4"M" is displayed in reverse with blinking.
Recording the setting name to memory is completed.
GROUP
5Press the
SELECT
6Press the
7Press the ENTER
switch to read in memory.
8Performed the memory read for the group name.
Refer to section "(1) Setting method (page 31)" and perform the correc-
tion of the group name.
– 33 –
switch to display the original group on the group
switch to move the cursor to "M".
switch to select the copy destination group.
switch to move the cursor "MR".