Connecting The Wireless Receiver To The Computer; Synchronising The Device - Silvercrest MK10 Manual

Mouse Keyboard Set MK10

Connecting the Wireless Receiver to the Computer

Next, plug the USB connector of the wireless receiver into a free USB port
on your powered-on computer.
The operating system will detect the new USB device and will automatically
install the corresponding driver. During this one-off procedure the operating
system will show the message: "Found New Hardware" and then will follow
with: „Your new hardware is installed and ready to use."
The uppermost status indicator on the wireless receiver will now light
green.

Synchronising the Device

The Mouse Keyboard Set is connected to the receiver via a wireless radio
link. The radio channel must be tuned in (synchronised) on first use.
Position the mouse and the keyboard near to the wireless receiver.
1. Press the synchronisation button (14) on the underside of
the keyboard.
2. Press the synchronisation button (8) on the wireless
receiver.
3. Press the synchronisation button (10) on the underside of
the mouse.
The status indicator (A) now lights steadily and connection
is completed.
Status indicator (A)
Synchronisation button (8)
English
7