Features Used During Call; Consultation - Siemens HiPath 1100 User Manual

Features used during Call

Step by step

Consultation

CONSULT
CONSULT
34
n s
Lift the handset. Start conversation.
At this time, the called destination receives the Caller ID
information displaying the number 3415565, even though
the call has been originated from number 3416496.
Features used during Call
Consultation
The Consultation feature allows the extension to make
a consultation to a third party when a call is in progress.
At the same time, it prevents the first caller from listen-
ing to the conversation.
Required: A call must be in progress.
Press the "CONSULT" key.
p
Enter the extension number (e.g. 11/101) or dial the ac-
cess code for an external line (e.g., 0) then the external
number.
w
Wait for the call to be answered.
n s
Lift the handset. Start conversation.
To return to the first call...
Press the "CONSULT" key
or
w t
Wait for the consulted party to replace the handset.
If the consultation extension is busy or does not an-
swer, or if you want to return to the first call before
answering...
Press the "CONSULT" key
qd
Enter the code to return to the first call. (*0)
w s
Wait to return. Proceed with the conversation.
[1] When the handset is replaced during a consultation, the first call is
transferred to the extension that was consulted.
1