Functions Used When Receiving Calls; Answering Calls - Siemens HiPath 1100 User Manual

Functions used when receiving calls

Step by step
Headphone on
46
Functions used when receiving
calls

Answering Calls

Extensions receive different ringing signals and tones
depending on the type of call being received and the
specified country setting. For example, some types of
ringing signals are:
• When receiving an internal call or callback, the tele-
phone rings twice (two short beeps) at 4-second in-
tervals (double sequence).
• When receiving an external call, the telephone rings
once (single beep) at 4-second intervals
• When receiving an entrance telephone call, the tele-
phone rings three times (triple beeps) at 4-second
intervals.
• When receiving a second call, a short tone (beep) is
heard at 6-second intervals.
• When receiving an alarm clock call, the telephone
rings twice (a long and a short beep) at 4-second in-
tervals).
...Using the Handset
Required: The telephone rings.
<< >>
The extension rings.
n
Lift the handset.
...with headphone
Required: A headphone must be connected. A key was
programmed with the "Headphone" feature or the head-
phone used has an electronic hook control (see feature
Headphone).
<< >>
The extension receives a calling signal. The headphone
only receives a calling signal if the electronic hook con-
trol is configured.
Press the "Headphone ON" key or the electronic hook
key.
Headphones do not send a call ending tone
(busy signal) at the end of a call.