Leveling The Styler - LG S3RERB Owner's Manual

LEVELING THE STYLER

WARNING
To reduce the risk of injury to persons, adhere
to all industry recommended safety procedures
including the use of long-sleeved gloves and
safety glasses.
Failure to follow this warning can cause serious
injury or death.
The appliance is heavy. Two or more people are
required when installing the Styler. Failure to
follow this warning can cause serious injury or
death.
To ensure that the Styler provides optimal
performance, it must be level. To minimize
vibration, noise, and unwanted movement, the
floor must be a perfectly level, solid surface.
Check to
it is
installing on
Installing on Carpeting
All leveling feet must rest solidly on the floor.
Gently push on the corners of the Styler to make
sure that it does not rock from corner to corner.
Make sure there are no gaps between the front
leveling feet and the floor.
make sure
level. If
carpet, see
first.
WARNING

The S tyler is heavy. Use two or more
people if installing the rear leveling feet.
Failure to do so can result in back injury or
other injury.

Keep the S tyler upright when moving
and installing it. If you lay the Styler on its
side, refrigerant may leak and cause the
appliance to malfunction.
2 Use the wrench (packaged
with the
turn the
Unscrew the front feet to raise the Styler or
screw in the feet to lower it. If unable to level
the unit using only the front feet, install the two
rear leveling feet by tipping the unit. Do not lay
the unit down to install the leveling feet.
INSTALLATION 19
manual) to
leveling feet.