Using The Styler - LG S3RERB Owner's Manual

24 OPERATION

USING THE STYLER

7 BEGIN CYCLE
Touch and hold Start/Pause to begin cycle. Pause cycle at any time by touching Start/Pause again. Restart
cycle within four minutes of pausing it, or the Styler shuts off and settings are lost. Do not open door during
1 PREPARE ITEMS
• Wash clothes first, if needed.
• No heat-sensitive items or items that can be damaged
by exposure to water. See Choosing Styler-Safe Clothing,
page 21.
• Place items on hangers or the shelf.
• Fasten buttons and close zippers to keep items on
moving hangers and prevent damage.
2 CLEAN LINT FILTER, CHANGE SHEET IN AROMA FILTER
Lift out filter and remove lint from last load for faster and more efficient
performance. Reinstall filter, checking alignment when closing grill. Do not
operate the Styler without the lint filter in place. See Checking the
Lint Filter, page 24. If using a fabric softener sheet in the aroma filter, change it
after every use. See Changing the Aroma Sheet, page 24.
3 CHECK WATER TANKS
Fill water supply tank if needed. Empty water drain tank if needed. Use clean tap
water in the supply tank for better product performance and lifespan. Do not use
distilled water or reuse water from the drain tank. See Checking the Water
Tanks, page 25.
4 LOAD STYLER
Pay attention to fabric care labels and cycle choice. If clothing is not
appropriate for the cycle selected, it may shrink or be seriously damaged. See
Loading the Styler, page 25.
Remove all empty hangers to avoid noise, friction, and damage to clothing.
5 TURN ON STYLER
Touch Power to turn on the Styler.
6 SELECT CYCLE
Touch icons to select desired cycle and settings. See the Cycle Guide, page 31.