Special Functions; Locking The Controls; Turning Alert Sounds On/Off; Setting A Delayed Start Time - LG S3RERB Owner's Manual

• Download and use the LG Smart Styler app on a
smart phone to confirm the current downloaded
cycle or to download another cycle.
• Only one Downloaded Cycle can be saved and
changed at a time. See Downloading Styler
Cycles, page 36.

SPECIAL FUNCTIONS

Some buttons also activate special functions,
including the Control Lock.

Locking the Controls

Use Control Lock to prevent unwanted use of the
Styler or to keep cycle settings from being changed
while the Styler is operating.
1 Touch and
Sanitary icon
seconds to
deactivate
Lock function.
2 The Control Lock
in the
all controls are
except the
• Control Lock does not lock the door.
• The Control Lock setting is retained even if there
is a power outage.
• Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be
deactivated to run another cycle.

Turning Alert Sounds On/Off

The button and alert sounds can be turned on/ off.
1 Touch and
Gentle Dry
three seconds to
or deactivate
button and
2 A tone sounds
the change.

Setting a Delayed Start Time

Use the Delay Start function to delay the start time of
the cycle.
1
2
3
hold the
• Touch and hold the button to increase the delay
for three
activate or
• Delay Start cannot be used for the Night Care
the Control
icon lights
• Do not open the door during operation.
display, and
disabled
Power button.
• Do not allow steam or hot air to escape the
* Smart Diagnosis™
Use this function with the LG Smart Styler application
on a smart phone or when contacting the LG service
center to help diagnose problems with the Styler. See
Using Smart Diagnosis™, page 43.
hold the
icon for
activate
the
alert sounds.
to confirm
Touch Power
Touch the
icon for
cycle.
Touch Delay
set the
of the
The default delay time is three hours. Each
time you touch the button, the time increases
by an hour, up to 19 hours.
time more quickly.
cycle.
CAUTION
There is a risk of burns or injury from escaping
hot air or steam.
cabinet during operation. Opening the door
during operation also affects performance,
lengthens drying time, and results in water
condensing and collecting on the floor.
OPERATION 39
cycle selector
the desired
Start to
start time
cycle.