LG S3RERB Owner's Manual page 47

Operation
Problem
Control panel won't
respond
The cycle won't start
Performance
Problem
Clothes are wet at the
end of the cycle
Odor is not removed at
end of cycle
Wrinkles are not
removed at end of cycle
Possible Cause
Control panel or button has dirt
on it
Control panel is locked
Start/Pause was not touched
after the cycle was set.
Cycle is producing steam
Control panel is locked
Possible Cause
Filter is clogged or grill is
upside down
Door gasket is damaged
Clothes caught in door
Clothes were stored for a long
period of time or are stained
with a strong-smelling substance
Clothes were stored for a long
period of time
S olutions
Dirt or foreign objects on the control panel
will interfere with the operation of the
buttons. Clean the control panel.
Disable the Control Lock function. See
Locking the Controls, page 34.
Touch Start.
There may be a period of inactivity while
steam is produced.
Disable the Control Lock function and touch
Start. See Locking the Controls, page 34.
S olutions
Clean the lint
Insert the
with the
right side.
If the rubber door gasket is damaged, it
leaves a gap in the door seal, affecting
performance of the appliance. Call for service.
Make sure all items are completely in the
cabinet and not stuck in the door, blocking it
from closing completely. Run the cycle again.
Odors can be
difficult to
from clothes that have been stored for long
periods or have strongsmelling, oily stains.
Wash the clothes first,
using the
Wrinkles may be
difficult to
set for a long time, especially in cotton and
linen fabrics. Iron clothes that have been
stored for a long period of time before
MAINTENANCE 47
filter.
grill
holes on the
particularly
remove
before
Styler.
very
remove if