Table of Contents
Advertisement
3.
Installation of wi-fi adapter MAC-567IF
NOTE ON WI-FI ADAPTER
The wi-fi device is connected to an indoor unit and is used to communicate status information as well as to control the
commands from the MELCloud.
•
Not all indoor units are compatible with the wi-fi adapter. Verify that the indoor unit is compatible with the wi-fi adapter
before attempting to connect the wi-fi adapter.
NOTE [ONLY ATW (AIR-WATER) INDOOR UNIT]:
►A software update may be required for older ATW indoor units.
►The ATW indoor unit software has to be updated before using the wi-fi adapter.
3.1
Safety measures
•
Read the safety instructions before installing, setting up or using the wi-fi adapter.
•
This installation manual contains important safety information. Follow the instructions.
•
After installing the wi-fi adapter, give this instruction manual to the user.
Instruct the user to store this manual, along with the operating instructions for the indoor unit, in a safe place.
3.1.1
Preparations for installation
Incorrect handling can have serious consequences, including serious injury or death.
WARNING!
►Do not install the wi-fi adapter yourself (user).
Incorrect installation can lead to fire, electrical shock, injury from the wi-fi adapter falling or water leakage.
Contact the dealer from whom you purchased the wi-fi adapter or an installer.
►The wi-fi adapter has to be installed safely as described in this installation manual.
Incorrect installation can lead to fire, electrical shock, damage or the wi-fi adapter falling.
►The wi-fi adapter has to be mounted in a place that can bear its weight.
If the wi-fi adapter is installed in a place that cannot bear the weight, the wi-fi adapter can fall and
cause damage or injury.
►Connect and secure the electrical cables such that external forces to the cables do not impact the
connections.
Incorrect connection or mounting can lead to failure, heat generation, smoke generation or fire.
►Components from Mitsubishi Electric or other approved components have to be used for the
installation.
Using an unsuitable component can lead to fire, electrical shock or damage / water leakage.
►Electrical work may be performed only in compliance with regional regulations and the instructions
contained in the installation manual.
An incorrect circuit capacity or incorrect installation can cause electrical shock or fire.
►Do not connect the wi-fi adapter to the grounding in the indoor unit.
►Securely attach the electrical equipment cover to the indoor unit.
If the electrical equipment cover is not properly secured to the indoor unit, dust, moisture or similar
can cause fire or short-circuiting.
►For your own safety, use suitable personal protective equipment and tools to install the wi-fi adapter.
Otherwise there is a risk of injury.
MELCLOUD
Software information 2019 / 15
Hide quick links:
Advertisement
Table of Contents
