Timer - Mitsubishi Electric MELCloud Installation And Operation Manual

6.6.2

Timer

The "Timer" feature allows you to enter certain times. This allows you to enter a series of control settings on a daily or
weekly basis – similar to the weekly schedule feature available with some hardware controllers. To avoid uncontrolled
operating modes, use only the MELCloud timer if it is connected.
ADD EVENT
Select "Add Event" to add a new event to the weekly schedule. This opens the screen "Add timer event".
ADD TIMER EVENT
Under "Add timer event", first select the time at which the event should occur. Then specify on which days of the week
the event should occur. Multiple days can be selected. Then click "Select settings". The system overview screen opens in
which the desired settings for the event can be made. Then Click "Back" to complete the timer settings.
CONTINUE / DELETE
Once the timer event has been created, select "Continue" to access the schedule. The event is now set. To delete the
event, select it in the schedule and click "Delete". If the event is one that occurs on multiple days, it will be deleted for all
of the days when "Delete" is selected.
SHOW DAYS...
Under "Show days..." you can configure the view of the schedule to meet your needs. You can view all, one or certain
weekdays in MELCloud.
NOTE!
►This feature works properly only when the systems are connected and communicating with the
MELCloud servers. If the internet connection is disrupted during this time, the systems may not be
able to be controlled until the connection is re-established.
►Keep in mind that all settings made in MELCloud or directly on another controller overwrite the timer
settings.
MELCLOUD
Software information 2019 / 45