Holiday Mode - Mitsubishi Electric MELCloud Installation And Operation Manual

MELCLOUD
6.6.1

Holiday Mode

Under "Holiday Mode" you can give MELCloud a time span in which you will be absent. This will reduce energy consump-
tion and prevent unauthorised use of the system when you are gone.
Holiday mode can easily be programmed by entering the starting and ending time.
ENABLE
Select "On" to activate holiday mode and "Off" to deactivate it.
START AND END DATE
When holiday mode is active, enter the time span of your absence by "Start Date" and "End Date". This way MELCloud
knows when to switch the system off and then on again. When input is complete, click "Next".
MENU STRUCTURE
As soon as holiday mode has been activated and set, select the systems in the MELCloud to which holiday mode should
apply. Select "Next" to complete the process. Please keep in mind that in MELCloud it is not possible to select different
holiday mode settings for different systems. The set holiday mode applies to all selected systems.
NOTE!
►This feature works properly only when the systems are connected and communicating with the
MELCloud servers. If the internet connection is disrupted during this time, the systems may not be
able to be controlled until the connection is re-established.
44 / Software information 2019