Mitsubishi Electric MELCloud Installation And Operation Manual page 16

MELCLOUD
WARNING!
►When connecting the wi-fi adapter, switch off the circuit breaker or unplug the power supply to the indoor
unit.
Otherwise there is a risk of electrical shock.
►Ensure that the wi-fi adapter plug connector is properly connected to the circuit board of the indoor unit.
Incomplete connection or incorrect mounting can lead to cable breakage, heat generation, smoke
generation or fire.
►Do not install the wi-fi adapter near automatic control devices such as automatic doors or smoke
detectors.
Otherwise malfunctions can cause accidents.
►Do not disassemble, modify or repair the wi-fi adapter yourself.
This could cause electrical shock, fire or injury.
►Do not use the wi-fi adapter near medical devices or persons wearing such a device, e.g. pacemakers or
implanted heart defibrillators.
A malfunctioning medical device or system can cause an accident.
►This device must be installed and operated at least 20 cm away from the user or observers.
Incorrect handling can have consequences, including injury and damage to the building.
CAUTION!
►To prevent damage caused by static electricity, touch a metal surface nearby to discharge the static
electricity before touching the wi-fi adapter.
The static electricity originating from a human body can damage the wi-fi adapter.
►Do not install the wi-fi adapter in a place with steam, such as a bathroom.
Avoid places where water can splash or condensate on walls.
Installing the device in such places can lead to electrical shock or failure.
►Do not install the wi-fi adapter in places exposed to direct sunlight or where the ambient temperature is
higher than 40 °C or lower than 0 °C.
Exposure to direct sunlight or environments where the temperature is to too high or too low can cause
the wi-fi adapter to deform or fail.
►Do not use the device in unusual environments,
Using the device in places with a lot of oil (including machine oil), steam or sulphuric gas can hinder the
functions and damage parts.
►Switch off the power supply to any connected devices before performing any assembly or cabling work.
Otherwise the wi-fi adapter or connected devices can malfunction or fail.
►The connecting cable may not touch pipes.
►Do not use the wi-fi adapter near other wireless devices, microwaves, cordless telephones or fax
machines.
Otherwise malfunctioning may occur.
►Mount the wi-fi adapter out of the reach of children.
Otherwise there is a risk of injury.
16 / Software information 2019