Setting The Alarm Clock - Silvercrest WE-2100 User Manual And Service Information

Setting the Alarm Clock

Make sure that the clock has been set correctly (see the
page 65 – Setting the Time). The alarm time can only be set
while the device is powered off. If it is still powered on, press
the Off button [6] to power the device off.
Press and hold the ALARM button [12].
Then press the HOUR button [9] repeatedly to set the hours
of the alarm time. You can also keep the HOUR button [9]
pressed down to accelerate the digit adjustment. To
distinguish ante meridian (morning) and post meridian
(afternoon) time, "PM" will display for post meridian clock
hours.
Keep the ALARM button [12] pressed. Then press the MIN
button [10] repeatedly to set the minutes of the alarm time.
You can also keep the MIN button [10] pressed down to
accelerate the digit adjustment.
Release the ALARM button [12] after the alarm clock has
been set correctly.
Multi-band tuner WE-2100
English - 67