Setting The Time - Silvercrest WE-2100 User Manual And Service Information

Setting the Time

The time can only be set while the device is powered off. If it is
still powered on, press the Off button [6] to power the device off.
Press and hold the TIME button [11].
Then press the HOUR button [9] repeatedly to set the hour.
You can also keep the HOUR button [9] pressed down to
accelerate the digit adjustment. To distinguish ante meridian
(morning) and post meridian (afternoon) time, "PM" will
display for post meridian clock hours.
Keep the TIME button [11] pressed. Then press the MIN
button [10] repeatedly to set the minutes. You can also keep
the MIN button [10] pressed down to accelerate the digit
adjustment.
Release the TIME button [11] after the clock has been set
correctly.
Please note that you should adjust the clock
when moving into a different time zone.
Multi-band tuner WE-2100
English - 65